Pit Type 2 Floors Car Parking Lift
Features
- Simple operation, economic and practical design, 1 parking space for 2 cars
- Pit type stacker, can be used in household or office building parking lot.
- Sharing post design, space saving, economic and more steady.
- No steel structure above ground, simple and graceful.
- The upper and lower space are fixed together, normally, the system lower to the pit, you can park car on upper space.
- Directly or rise the system to park the car on lower space.
- Multiple safety protection device.
- Optional hydraulic oil cylinder or motor & chain driven mode.
- Wave plate or diamond plate, are optional, you can choose hot galvanizing, electroplating or powder spray.
- Mold machining through the whole process.
- Pass 120% capacity dynamic load text and 150% static load test.
- Italian oil seal to make sure no oil leakage.
- Optional ultrared rays alarm device, in case of unguarded entrance.
Technical Parameters
- The standard depth of pit is 2.5 meters, and the load of each layer is 2-2.5 tons
- The parking height/width of floor B1 is 1.8m/ 2.1m.
- Overall size: 5400*2850*2500mm;
- Vehicle on floor B1 warm in winter and cool in summer, anti-theft and anti-rain&snow, vehicle on floor 1 free access, intelligent and practical;
- Meet CE standard voltage system, button operating system, voltage: 380V, the foundation shall be constructed according to the requirements of the manufacturer;
- Motor power: 3.7kw;
- Rise time approx 40s, Fall time approx 35s;
- Process: shot blasting spray/non-spray paint treatment;
- Space height requirement: 3.6 m;
More Models for Optional
